# \#wr44v2 **URL:** https://forums.digi.com/tag/wr44v2/2127.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Port Isolate can all LANs have the same subnet addresses? WR44.](https://forums.digi.com/t/port-isolate-can-all-lans-have-the-same-subnet-addresses-wr44/22589)
**Author:** [@basicdave](https://forums.digi.com/u/basicdave)\ **Replies:** 0\ **Last updated:** [August 9, 2021, 9:37am UTC](https://forums.digi.com/t/port-isolate-can-all-lans-have-the-same-subnet-addresses-wr44/22589 "2021-08-09T09:37:02Z")
I am trying to create redundant LANs for a lab with multiple benches. I want to be able to move instruments from one bench to another so need to create multiple LANs that they can plug into with the same address. I curr… --- ## [WR44, pcap to USB](https://forums.digi.com/t/wr44-pcap-to-usb/22365)
**Author:** [@S-conne](https://forums.digi.com/u/S-conne)\ **Replies:** 0\ **Last updated:** [April 20, 2021, 12:37pm UTC](https://forums.digi.com/t/wr44-pcap-to-usb/22365 "2021-04-20T12:37:59Z")
Hi We need to do an extended loggin on a wr44. For this we will use an usb stick. We know how to set up logging and redirect both the eventlog and the analyzer to usb. But my question is if there are any way to also au… --- ## [WR44 cannot login to WebUI\[SOLVED\]](https://forums.digi.com/t/wr44-cannot-login-to-webui-solved/21866)
**Author:** [@jserink](https://forums.digi.com/u/jserink)\ **Replies:** 1\ **Last updated:** [October 8, 2020, 4:22am UTC](https://forums.digi.com/t/wr44-cannot-login-to-webui-solved/21866 "2020-10-08T04:22:16Z")
Hello: I have a Digi trasnport WR44 Vdsl model that we did a factory reset to. It will no allow logins via the webui on 192.168.1.1. The Serial port was open at 115.2 8N1 with Xon/Xoff hand shaking and I created a us… --- ## [Cannot Login to Digi WR44 UI after restoring configuration from another WR44](https://forums.digi.com/t/cannot-login-to-digi-wr44-ui-after-restoring-configuration-from-another-wr44/21416)
**Author:** [@kpgsuyat](https://forums.digi.com/u/kpgsuyat)\ **Replies:** 1\ **Last updated:** [June 4, 2020, 9:15am UTC](https://forums.digi.com/t/cannot-login-to-digi-wr44-ui-after-restoring-configuration-from-another-wr44/21416 "2020-06-04T09:15:09Z")
I’m about to replace my current WR44 since it is already faulty. However after I restored the configuration from the faulty router to the new one, I cannot able to login to web interface and seems the configuration is no… --- ## [How do I clear a "sslv3 alert certificate unknown" error on my Transport digi?](https://forums.digi.com/t/how-do-i-clear-a-sslv3-alert-certificate-unknown-error-on-my-transport-digi/21009)
**Author:** [@Daniel\_2019](https://forums.digi.com/u/Daniel_2019)\ **Replies:** 2\ **Last updated:** [January 7, 2020, 4:16am UTC](https://forums.digi.com/t/how-do-i-clear-a-sslv3-alert-certificate-unknown-error-on-my-transport-digi/21009 "2020-01-07T04:16:38Z")
Does anyone have a recommendation on how to clear the following error? Certificate Code Error Lib: SSL routines Func: SSL3\_READ\_BYTES Reason: sslv3 alert certificate unknown --- ## [WR44 intermittent power-cycle](https://forums.digi.com/t/wr44-intermittent-power-cycle/20477)
**Author:** [@alwayson](https://forums.digi.com/u/alwayson)\ **Replies:** 0\ **Last updated:** [May 8, 2019, 4:30pm UTC](https://forums.digi.com/t/wr44-intermittent-power-cycle/20477 "2019-05-08T16:30:23Z")
Hi I have a WR44 that keeps power-cycling. It’s the second unit I’ve tried. I suspect it’s related to fluctuating 4G signal quality but I’ve never had this happen before (that I know of). I believe I’ve configured the u… --- ## [why is fpga.rbf not recognized](https://forums.digi.com/t/why-is-fpga-rbf-not-recognized/19218)
**Author:** [@jonesst](https://forums.digi.com/u/jonesst)\ **Replies:** 2\ **Last updated:** [February 27, 2018, 6:38am UTC](https://forums.digi.com/t/why-is-fpga-rbf-not-recognized/19218 "2018-02-27T06:38:22Z")
When updating firmware I get an error skipped fpga.rbf is not recognized. I am updating WR44v2 modem. --- ## [How to disable ppp (cell connection) on DIGI TRANSPORT WR44](https://forums.digi.com/t/how-to-disable-ppp-cell-connection-on-digi-transport-wr44/19080)
**Author:** [@antoinetr](https://forums.digi.com/u/antoinetr)\ **Replies:** 2\ **Last updated:** [February 5, 2018, 10:44am UTC](https://forums.digi.com/t/how-to-disable-ppp-cell-connection-on-digi-transport-wr44/19080 "2018-02-05T10:44:15Z")
Hi, I would like to disable the cell connection (ppp) so i can instead bring in the WAN via one of the Ethernet ports. I tried removing the SIM card but the router continues to want to dial up the cell connection. I t… --- ## [WR44 with MC7354 module, need to disable 700 MHz band... How do I do that?](https://forums.digi.com/t/wr44-with-mc7354-module-need-to-disable-700-mhz-band-how-do-i-do-that/19025)
**Author:** [@Bryonhu](https://forums.digi.com/u/Bryonhu)\ **Replies:** 1\ **Last updated:** [December 24, 2017, 5:13pm UTC](https://forums.digi.com/t/wr44-with-mc7354-module-need-to-disable-700-mhz-band-how-do-i-do-that/19025 "2017-12-24T17:13:35Z")
Band 4 1700/2100 provides better internet connection, radio will choose 700 MHz band as it has a stronger signal. Would like to disable the 700 MHz band by command but have had zero results using "modemcc AT!Band command… --- ## [Failure accepting socket on WR44v2 (python)](https://forums.digi.com/t/failure-accepting-socket-on-wr44v2-python/17676)
**Author:** [@brownlieig](https://forums.digi.com/u/brownlieig)\ **Replies:** 0\ **Last updated:** [November 29, 2016, 4:03pm UTC](https://forums.digi.com/t/failure-accepting-socket-on-wr44v2-python/17676 "2016-11-29T16:03:04Z")
I am writing an application using a third party python library “Modbus\_tk”. I had this running before on a similar Digi device but I am currently getting “Error 12” returned from the socket.accept() method. Can someone p… --- ## [How to correctly port forward on DIGI Transport WR44v2](https://forums.digi.com/t/how-to-correctly-port-forward-on-digi-transport-wr44v2/17355)
**Author:** [@gcaloyloy](https://forums.digi.com/u/gcaloyloy)\ **Replies:** 2\ **Last updated:** [September 8, 2016, 4:33pm UTC](https://forums.digi.com/t/how-to-correctly-port-forward-on-digi-transport-wr44v2/17355 "2016-09-08T16:33:36Z")
I have two DIGI WR44v2 modems both with identical firmware (latest). For some reason, I am unable to correctly port forward to another device on the same network. Here is my modem specs: Model: TransPort WR4… --- ## [Digi TransPort WR44v2 - how to failover from Cell to ETH1](https://forums.digi.com/t/digi-transport-wr44v2-how-to-failover-from-cell-to-eth1/17146)
**Author:** [@gatorgal88](https://forums.digi.com/u/gatorgal88)\ **Replies:** 3\ **Last updated:** [July 28, 2016, 7:08pm UTC](https://forums.digi.com/t/digi-transport-wr44v2-how-to-failover-from-cell-to-eth1/17146 "2016-07-28T19:08:14Z")
We purchased 46 Digi TransPort WR44v2. I am looking to see what is the easiest way to automatically failover from cellular signal (SIM) to ETH1 (that will come from Satellite). We need to set the ETH1 to 2nd priority o… --- ## [Why does the wifi splash page cause my browser to reject the session do to a bad certificate?](https://forums.digi.com/t/why-does-the-wifi-splash-page-cause-my-browser-to-reject-the-session-do-to-a-bad-certificate/15544)
**Author:** [@dherde](https://forums.digi.com/u/dherde)\ **Replies:** 2\ **Last updated:** [October 12, 2015, 12:20pm UTC](https://forums.digi.com/t/why-does-the-wifi-splash-page-cause-my-browser-to-reject-the-session-do-to-a-bad-certificate/15544 "2015-10-12T12:20:18Z")
Since yahoo and google and everyone is moving to https, the andriod or firefox browser will not display the splash page (custom) to allow access to the internet. I recieve back a message that says " www.yahoo.com normal… --- ## [copying a file from USB autoexec.bat fails.](https://forums.digi.com/t/copying-a-file-from-usb-autoexec-bat-fails/14820)
**Author:** [@dherde](https://forums.digi.com/u/dherde)\ **Replies:** 2\ **Last updated:** [May 22, 2015, 12:20pm UTC](https://forums.digi.com/t/copying-a-file-from-usb-autoexec-bat-fails/14820 "2015-05-22T12:20:49Z")
I have a usb autoexec.bat file that (among other things) loads 3 gif files onto a Transport wr44. It loads the all the requested files but one. The gif is small (8kb), the file name is 8.3 compatible (etra.gif), and it i…