# \#xbee-coordinator-rou **URL:** https://forums.digi.com/tag/xbee-coordinator-rou/1656.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Arbitration process between radios for a S3B-900HP Programmable Digimesh coordinator](https://forums.digi.com/t/arbitration-process-between-radios-for-a-s3b-900hp-programmable-digimesh-coordinator/23082)
**Author:** [@D2K](https://forums.digi.com/u/D2K)\ **Replies:** 7\ **Last updated:** [May 26, 2022, 11:27am UTC](https://forums.digi.com/t/arbitration-process-between-radios-for-a-s3b-900hp-programmable-digimesh-coordinator/23082 "2022-05-26T11:27:04Z")
What is the best way on the S3B-900HP Programmable to implement a network where the Coordinator can be changed? Example scenario, really the only scenario: 1.) Two mobile devices (“A” and “B”) arrive to a location wher… --- ## [Can we make cluster tree topology with 3 XBee S2C Module(1 Coordinator, 1 Router and 1 End Device)](https://forums.digi.com/t/can-we-make-cluster-tree-topology-with-3-xbee-s2c-module-1-coordinator-1-router-and-1-end-device/23020)
**Author:** [@SurajitDigi](https://forums.digi.com/u/SurajitDigi)\ **Replies:** 1\ **Last updated:** [April 1, 2022, 10:27am UTC](https://forums.digi.com/t/can-we-make-cluster-tree-topology-with-3-xbee-s2c-module-1-coordinator-1-router-and-1-end-device/23020 "2022-04-01T10:27:45Z")
I want a Star Network Topology but the range between coordinator and end device is beyond the range of XBee S2C module. Then I thought to use cluster tree like topology, where my all end devices will communicate to a cen… --- ## [Xbee Pro S2C sensors disconnect in the range of 500 meters and don't connect again even if they come closer.](https://forums.digi.com/t/xbee-pro-s2c-sensors-disconnect-in-the-range-of-500-meters-and-dont-connect-again-even-if-they-come-closer/22277)
**Author:** [@mfurkannargul](https://forums.digi.com/u/mfurkannargul)\ **Replies:** 9\ **Last updated:** [April 20, 2021, 12:40pm UTC](https://forums.digi.com/t/xbee-pro-s2c-sensors-disconnect-in-the-range-of-500-meters-and-dont-connect-again-even-if-they-come-closer/22277 "2021-04-20T12:40:55Z")
Xbee sensors disconnect in 500 meters and don’t connect back even if we make them come closer. The reason for this issue could be that Routers might be trying to find a new leader when they couldn’t get data from the Coo… --- ## [Why end devices are removed from network after 2-3 days ?](https://forums.digi.com/t/why-end-devices-are-removed-from-network-after-2-3-days/22346)
**Author:** [@HMorais](https://forums.digi.com/u/HMorais)\ **Replies:** 2\ **Last updated:** [April 13, 2021, 2:12pm UTC](https://forums.digi.com/t/why-end-devices-are-removed-from-network-after-2-3-days/22346 "2021-04-13T14:12:23Z")
I have a xbee3 zigbee module as coordinator and 4 third-party end devices. I have no problems at the beginning, sending unicast commands with 64-bits addresses, and receiving data (and NC=10). After 2-3 days, end devic… --- ## [how to unjoin end device from coordinator](https://forums.digi.com/t/how-to-unjoin-end-device-from-coordinator/22063)
**Author:** [@gustcool2](https://forums.digi.com/u/gustcool2)\ **Replies:** 4\ **Last updated:** [December 30, 2020, 1:28pm UTC](https://forums.digi.com/t/how-to-unjoin-end-device-from-coordinator/22063 "2020-12-30T13:28:30Z")
Hi I set xbee3 module as ZHA. and some end device(light switch) join a network. this is a 64 bit address of end device.(000d6f000c1365bd) and I tried to unjoin a device from coordinator using AT Command(Register Join… --- ## [XBee router join to other Coordinator without reset](https://forums.digi.com/t/xbee-router-join-to-other-coordinator-without-reset/21979)
**Author:** [@juann4](https://forums.digi.com/u/juann4)\ **Replies:** 1\ **Last updated:** [November 9, 2020, 9:56am UTC](https://forums.digi.com/t/xbee-router-join-to-other-coordinator-without-reset/21979 "2020-11-09T09:56:49Z")
have an XBee router and two XBee Coordinator configured with the same PAN ID (1234 in all). My goal is that initially, the router is connected to coordinator 1. While it is connected, I disconnect coordinator 1 and conne… --- ## [Coordinator sends data to Router, but Router can't send back](https://forums.digi.com/t/coordinator-sends-data-to-router-but-router-cant-send-back/21903)
**Author:** [@elizabeth.farrell](https://forums.digi.com/u/elizabeth.farrell)\ **Replies:** 2\ **Last updated:** [October 21, 2020, 10:32am UTC](https://forums.digi.com/t/coordinator-sends-data-to-router-but-router-cant-send-back/21903 "2020-10-21T10:32:13Z")
My coordinator successfully transmits data to my router, but my router cannot send data back. I’m working in AT mode, the pan ID, AI, and channel all match. DH/DL on the coordinator is set to 0/FFFF, DH/DL on the router … --- ## [Cn a zigbee end device can become a router or coordinator by using at commands through arduino?](https://forums.digi.com/t/cn-a-zigbee-end-device-can-become-a-router-or-coordinator-by-using-at-commands-through-arduino/21632)
**Author:** [@amrita](https://forums.digi.com/u/amrita)\ **Replies:** 2\ **Last updated:** [August 7, 2020, 4:39am UTC](https://forums.digi.com/t/cn-a-zigbee-end-device-can-become-a-router-or-coordinator-by-using-at-commands-through-arduino/21632 "2020-08-07T04:39:32Z")
i want to make an end device to coordiator node when needed .its is possible to switch an end device to become a coordinator node using at commandd sent to it via arduino program --- ## [Xbee API Mode - Coordinator -\> Router -\> End Device](https://forums.digi.com/t/xbee-api-mode-coordinator-router-end-device/21487)
**Author:** [@ijmichel](https://forums.digi.com/u/ijmichel)\ **Replies:** 9\ **Last updated:** [July 24, 2020, 1:52pm UTC](https://forums.digi.com/t/xbee-api-mode-coordinator-router-end-device/21487 "2020-07-24T13:52:16Z")
Hi All, Right now I have a setup in API mode where I am able to send my sensor data from my end device (Arduino attached to an XBee Shield) directly to my router (Also an Arduino/Shield combo). With this code: #includ… --- ## [How to control operating channel by python](https://forums.digi.com/t/how-to-control-operating-channel-by-python/21553)
**Author:** [@Seoyeon](https://forums.digi.com/u/Seoyeon)\ **Replies:** 2\ **Last updated:** [July 14, 2020, 9:03am UTC](https://forums.digi.com/t/how-to-control-operating-channel-by-python/21553 "2020-07-14T09:03:24Z")
Hello community! We are doing project which coordinator send data router 1, and router1 send data router2 (it was like ad-hoc network), After receiving data from coordinator, we change router 1 to coordinator for sendi… --- ## [How to recover from Frame Error in DigiMesh module](https://forums.digi.com/t/how-to-recover-from-frame-error-in-digimesh-module/21345)
**Author:** [@jrgert](https://forums.digi.com/u/jrgert)\ **Replies:** 5\ **Last updated:** [May 8, 2020, 8:33am UTC](https://forums.digi.com/t/how-to-recover-from-frame-error-in-digimesh-module/21345 "2020-05-08T08:33:42Z")
Using XB9X-DM, XBee SX, firmware 9007 setup as a Router in API 1 mode. Router XBee controlled by MCU acting as a client that periodically polls three (Non-routing) end devices via TX Request frames 0x10. Works great - … --- ## [End device not routing through router to connect to coordinator](https://forums.digi.com/t/end-device-not-routing-through-router-to-connect-to-coordinator/17372)
**Author:** [@vinayatsusten](https://forums.digi.com/u/vinayatsusten)\ **Replies:** 11\ **Last updated:** [December 26, 2019, 9:55am UTC](https://forums.digi.com/t/end-device-not-routing-through-router-to-connect-to-coordinator/17372 "2019-12-26T09:55:14Z")
I have 3 modules of xbee pro s2b and I’ve configured one as coordinator, router and 3rd one as end-device. I managed to put end-device out of the range from coordinator but in the range of router and router is in the ran… --- ## [Why End-Devices persist in the Routing Table of a Coordinator even those End-Devices are not connected any more?](https://forums.digi.com/t/why-end-devices-persist-in-the-routing-table-of-a-coordinator-even-those-end-devices-are-not-connected-any-more/20803)
**Author:** [@Molas89](https://forums.digi.com/u/Molas89)\ **Replies:** 0\ **Last updated:** [October 3, 2019, 9:21am UTC](https://forums.digi.com/t/why-end-devices-persist-in-the-routing-table-of-a-coordinator-even-those-end-devices-are-not-connected-any-more/20803 "2019-10-03T09:21:58Z")
I have been experiencing the next behavior: I have a Coordinator with two Routers and two End Devices, all of them are S2C series XBEE. Using XCTU in Network Working Mode, I see the two devices connected to the Coordin… --- ## [XBee S2C (Coordinator API=1), XBee S2C (Router API=0)](https://forums.digi.com/t/xbee-s2c-coordinator-api-1-xbee-s2c-router-api-0/19726)
**Author:** [@Seira07](https://forums.digi.com/u/Seira07)\ **Replies:** 0\ **Last updated:** [July 18, 2018, 10:56am UTC](https://forums.digi.com/t/xbee-s2c-coordinator-api-1-xbee-s2c-router-api-0/19726 "2018-07-18T10:56:46Z")
My Router is connected in Arduino and the transmission was a success. But in my receiving side, the coordinator is receiving an HEX value in XCTU and I don’t know what python code shall I use. Can you give me an example … --- ## [What is max time taken by Xbee S2 to send a packet of 24bytes with 115200 baud rate?](https://forums.digi.com/t/what-is-max-time-taken-by-xbee-s2-to-send-a-packet-of-24bytes-with-115200-baud-rate/19152)
**Author:** [@Nini](https://forums.digi.com/u/Nini)\ **Replies:** 0\ **Last updated:** [February 15, 2018, 2:42pm UTC](https://forums.digi.com/t/what-is-max-time-taken-by-xbee-s2-to-send-a-packet-of-24bytes-with-115200-baud-rate/19152 "2018-02-15T14:42:29Z")
I want to send 24bytes of data within a milli seconds( 4 pkts/ms) for my project.But it takes 4 ms/per packet for my project.How to optmize it.Am Model: Xbee S2C Protocol: Xbee No of Xbees - 2 End point - 1 Co - Ord… --- ## [What is max time taken by Xbee S2 to send a packet of 24bytes with 115200 baud rate?](https://forums.digi.com/t/what-is-max-time-taken-by-xbee-s2-to-send-a-packet-of-24bytes-with-115200-baud-rate/19151)
**Author:** [@Nini](https://forums.digi.com/u/Nini)\ **Replies:** 0\ **Last updated:** [February 15, 2018, 2:42pm UTC](https://forums.digi.com/t/what-is-max-time-taken-by-xbee-s2-to-send-a-packet-of-24bytes-with-115200-baud-rate/19151 "2018-02-15T14:42:13Z")
I want to send 24bytes of data within a millin seconds( 4 pkts/ms) for my project.But it takes 4 ms/per packet for my project.How to optmize it.Am Model: Xbee S2C Protocol: Xbee No of Xbees - 2 End point - 1 Co - Or… --- ## [XBEE Zigbee S2 - Transmit Request from End Device to Coordinator problem](https://forums.digi.com/t/xbee-zigbee-s2-transmit-request-from-end-device-to-coordinator-problem/16663)
**Author:** [@LPS](https://forums.digi.com/u/LPS)\ **Replies:** 4\ **Last updated:** [December 29, 2017, 10:45am UTC](https://forums.digi.com/t/xbee-zigbee-s2-transmit-request-from-end-device-to-coordinator-problem/16663 "2017-12-29T10:45:43Z")
Hello, I am testing a simple setup, fully with the XCTU software no external code, to understand the behaviour of the Transmit Request (API Frame 0x10). The setup is composed of a Xbee Zigbee PRO S2B coordinator in API… --- ## [RSSI off in API mode](https://forums.digi.com/t/rssi-off-in-api-mode/18654)
**Author:** [@roberto.santini89](https://forums.digi.com/u/roberto.santini89)\ **Replies:** 5\ **Last updated:** [August 18, 2017, 1:54pm UTC](https://forums.digi.com/t/rssi-off-in-api-mode/18654 "2017-08-18T13:54:19Z")
Hi, I have two Xbee S2C with ZigBee Firmware, one as Coordinator, one as End Device (router). Now, If I send a Remote AT Command From Coordinator to Router, The RSSI led switch on on both Xbee, the message is received a… --- ## [How we can forcefully connect end device to the router](https://forums.digi.com/t/how-we-can-forcefully-connect-end-device-to-the-router/18652)
**Author:** [@Sheetal\_Kasar](https://forums.digi.com/u/Sheetal_Kasar)\ **Replies:** 1\ **Last updated:** [August 18, 2017, 11:02am UTC](https://forums.digi.com/t/how-we-can-forcefully-connect-end-device-to-the-router/18652 "2017-08-18T11:02:30Z")
Hello, I am using XBEE PRO S2C modules, where i want to forcefully connect end device to router.How can I do it. It should’nt change the path once connected. --- ## [Xbee communication between S2 and S2C](https://forums.digi.com/t/xbee-communication-between-s2-and-s2c/18461)
**Author:** [@hari6493](https://forums.digi.com/u/hari6493)\ **Replies:** 1\ **Last updated:** [June 20, 2017, 2:02pm UTC](https://forums.digi.com/t/xbee-communication-between-s2-and-s2c/18461 "2017-06-20T14:02:07Z")
Am using two XBee’s s2c as coordinator and S2 as a router to interface Arduino UNO and rpi3. I am able to able to communicate with the coordinator to the router but the reverse is not happening. Please suggest me ways to… --- ## [Difference Between Programmable Xbee and normal Xbee](https://forums.digi.com/t/difference-between-programmable-xbee-and-normal-xbee/18217)
**Author:** [@santosh\_funambolo](https://forums.digi.com/u/santosh_funambolo)\ **Replies:** 1\ **Last updated:** [April 5, 2017, 12:56pm UTC](https://forums.digi.com/t/difference-between-programmable-xbee-and-normal-xbee/18217 "2017-04-05T12:56:25Z")
I am trying to communicate with 3 xbee’s in broad cast mode. First i had 3 normal Xbee and it was working with below configauration Coordinator : PAN : 1000 CE : Enable DH : 0 DL : FFFF Router 1: PAN : 1000 CE :… --- ## [Xbee S2C router to router communication](https://forums.digi.com/t/xbee-s2c-router-to-router-communication/18170)
**Author:** [@maverick](https://forums.digi.com/u/maverick)\ **Replies:** 1\ **Last updated:** [March 24, 2017, 12:13pm UTC](https://forums.digi.com/t/xbee-s2c-router-to-router-communication/18170 "2017-03-24T12:13:04Z")
I have 3 xbee S2c modules. I have configured 1 xbee as coordinator and another 2 xbee as routers (There is no end devices in network) Settings for Coordinator in broadcast mode, DH = 0 DL = FFFF Settings for router 1… --- ## [Question about router in API mode](https://forums.digi.com/t/question-about-router-in-api-mode/18038)
**Author:** [@morcillo](https://forums.digi.com/u/morcillo)\ **Replies:** 2\ **Last updated:** [February 21, 2017, 10:00am UTC](https://forums.digi.com/t/question-about-router-in-api-mode/18038 "2017-02-21T10:00:00Z")
Hello, I have bought about 20 Xbee Pro S2C modules. Initially I started using it by sending a byte and receiving a byte, learning later that it was in AT mode and it isn’t the best configuration in order to create a co… --- ## [How to I select which coordinator to connect to?](https://forums.digi.com/t/how-to-i-select-which-coordinator-to-connect-to/17725)
**Author:** [@k4bri](https://forums.digi.com/u/k4bri)\ **Replies:** 1\ **Last updated:** [November 29, 2016, 5:02pm UTC](https://forums.digi.com/t/how-to-i-select-which-coordinator-to-connect-to/17725 "2016-11-29T17:02:23Z")
I have a scenario where there will be multiple independent networks in relatively close proximity - all gathering their own data, all happily running on their own. I have a serial router who’s job it is to connect to ea… --- ## [How to broadcast from Coordinator in API mode to router in AT mode at a rate of 0.01ms](https://forums.digi.com/t/how-to-broadcast-from-coordinator-in-api-mode-to-router-in-at-mode-at-a-rate-of-0-01ms/17728)
**Author:** [@Awanish](https://forums.digi.com/u/Awanish)\ **Replies:** 1\ **Last updated:** [November 29, 2016, 4:58pm UTC](https://forums.digi.com/t/how-to-broadcast-from-coordinator-in-api-mode-to-router-in-at-mode-at-a-rate-of-0-01ms/17728 "2016-11-29T16:58:43Z")
I have one XBEE S2 coordinator in API mode and 4 XBEE S2 Routers in AT mode. I would like to broadcast a string at the rate of 30 ms max from coordinator to all routers. I tried in this mode and its working at a rate of … --- ## [How to detect routers with the wrong operating PAN ID?](https://forums.digi.com/t/how-to-detect-routers-with-the-wrong-operating-pan-id/17265)
**Author:** [@rmilne](https://forums.digi.com/u/rmilne)\ **Replies:** 3\ **Last updated:** [August 19, 2016, 1:53pm UTC](https://forums.digi.com/t/how-to-detect-routers-with-the-wrong-operating-pan-id/17265 "2016-08-19T13:53:19Z")
I have several zigbee router devices that have bound themselves to the wrong coordinator operating PAN ID (16bit id). The devices are fairly inaccessible, is there someway I can use the coordinator node (that has a cell… --- ## [How can i check that the message is passed through which router?](https://forums.digi.com/t/how-can-i-check-that-the-message-is-passed-through-which-router/17137)
**Author:** [@SungPum](https://forums.digi.com/u/SungPum)\ **Replies:** 1\ **Last updated:** [July 28, 2016, 2:04am UTC](https://forums.digi.com/t/how-can-i-check-that-the-message-is-passed-through-which-router/17137 "2016-07-28T02:04:56Z")
I’m using three Xbee and tring to make a mesh networking system. I have performed a experiment in order to confirm the functionality of the module. I was set up as follows. \[laptop A\] \[Xbee S2\] - Coordinator ↑ s… --- ## [\[Xbee\]Router lamp is not blinking](https://forums.digi.com/t/xbee-router-lamp-is-not-blinking/17093)
**Author:** [@SungPum](https://forums.digi.com/u/SungPum)\ **Replies:** 1\ **Last updated:** [July 18, 2016, 2:55am UTC](https://forums.digi.com/t/xbee-router-lamp-is-not-blinking/17093 "2016-07-18T02:55:21Z")
I’m using three Xbee two of them are “Xbee S2C” and the other “Xbee S2(IEEE 802.15.4)” I have performed experiments In order to confirm the functionality of the module. I was set up as follows. \[laptop A\] \[Xbee S… --- ## [Problem in digimesh network synchronization](https://forums.digi.com/t/problem-in-digimesh-network-synchronization/16813)
**Author:** [@galazari](https://forums.digi.com/u/galazari)\ **Replies:** 1\ **Last updated:** [May 27, 2016, 9:47am UTC](https://forums.digi.com/t/problem-in-digimesh-network-synchronization/16813 "2016-05-27T09:47:41Z")
Hello, I’m using Digi XBee 865/868LP RF Modules. I have a problem when a module has to take the network OS and OW values and use them. I’m using unicast transmission so I’m making a node discovery process to find the a… --- ## [Communication architecture with XBee S2C](https://forums.digi.com/t/communication-architecture-with-xbee-s2c/16652)
**Author:** [@lilyhack](https://forums.digi.com/u/lilyhack)\ **Replies:** 3\ **Last updated:** [May 4, 2016, 12:56am UTC](https://forums.digi.com/t/communication-architecture-with-xbee-s2c/16652 "2016-05-04T00:56:07Z")
I am building a project using Xbee ZigBee pro (S2C) Raspberry Pi acts as a coordinator TI-based microcontrollers act as ED or Router For power saving, I am thinking of making all the microcontrollers as ED. So no Rout… [Next page](https://forums.digi.com/tag/xbee-coordinator-rou/1656.md?match_all_tags=true&page=1&tags%5B%5D=xbee-coordinator-rou)