# \#xbee-network **URL:** https://forums.digi.com/tag/xbee-network/773.md [Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md) --- ## [Does DigiMesh devices with different ID (network ID) hop messages to different network?](https://forums.digi.com/t/does-digimesh-devices-with-different-id-network-id-hop-messages-to-different-network/23275)
**Author:** [@L0uisc](https://forums.digi.com/u/L0uisc)\ **Replies:** 1\ **Last updated:** [November 2, 2022, 8:50am UTC](https://forums.digi.com/t/does-digimesh-devices-with-different-id-network-id-hop-messages-to-different-network/23275 "2022-11-02T08:50:43Z")
Does DigiMesh devices (Specifically Xbee SX 900) configured with different ID values (Say 0x7FFF and 0x7FFE) hop messages from a different network ID? E.g.: Device 1: ID=0x7FFF Device 2: ID=0x7FFE Device 3: ID=0x7FFF N… --- ## [Tips for flashing xBee Pro 900HP OTA from Point to Multi-point to Mesh?](https://forums.digi.com/t/tips-for-flashing-xbee-pro-900hp-ota-from-point-to-multi-point-to-mesh/23265)
**Author:** [@BrettMargo](https://forums.digi.com/u/BrettMargo)\ **Replies:** 4\ **Last updated:** [October 28, 2022, 9:05am UTC](https://forums.digi.com/t/tips-for-flashing-xbee-pro-900hp-ota-from-point-to-multi-point-to-mesh/23265 "2022-10-28T09:05:15Z")
Hi we have a network of ~70 XBP9B-DPST-001. I am attempting to flash them over the air from Point to Multi-point (1075) to the Mesh firmware (8075). I’ve been able to get a few but most time out or fail. They are within… --- ## [Getting NI value from RemoteDevice](https://forums.digi.com/t/getting-ni-value-from-remotedevice/22756)
**Author:** [@AriaChloe](https://forums.digi.com/u/AriaChloe)\ **Replies:** 1\ **Last updated:** [October 26, 2021, 9:34am UTC](https://forums.digi.com/t/getting-ni-value-from-remotedevice/22756 "2021-10-26T09:34:24Z")
Hi! I am using micropython along with Xbee 3 zigbee which are functioning as routers , controller making use of python API. With operation of network discovery I get only NI parameter with remote xbee on basis of contr… --- ## [Getting NI value from RemoteDevice](https://forums.digi.com/t/getting-ni-value-from-remotedevice/22042)
**Author:** [@DKuchen](https://forums.digi.com/u/DKuchen)\ **Replies:** 3\ **Last updated:** [December 9, 2020, 12:33pm UTC](https://forums.digi.com/t/getting-ni-value-from-remotedevice/22042 "2020-12-09T12:33:44Z")
For my setup I am running Micropython on XBee3 Zigbee modules acting as routers, my controller is using the Python API. I am only able to get the NI parameter from a remote xbee after performing a network\_discovery from… --- ## [Using xbee python library network modification callback function provided: how to get rid of ghost node](https://forums.digi.com/t/using-xbee-python-library-network-modification-callback-function-provided-how-to-get-rid-of-ghost-node/21627)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 10\ **Last updated:** [August 5, 2020, 8:51am UTC](https://forums.digi.com/t/using-xbee-python-library-network-modification-callback-function-provided-how-to-get-rid-of-ghost-node/21627 "2020-08-05T08:51:32Z")
hello From the xbee python library I am using the provided network modification callback function: def my\_callback(event\_type, reason, node): “”" Callback to notify about a new network modification event. Args: ev… --- ## [Failing to establish network communication with my XBee 3(s).](https://forums.digi.com/t/failing-to-establish-network-communication-with-my-xbee-3-s/21536)
**Author:** [@edunn106](https://forums.digi.com/u/edunn106)\ **Replies:** 1\ **Last updated:** [July 8, 2020, 12:30pm UTC](https://forums.digi.com/t/failing-to-establish-network-communication-with-my-xbee-3-s/21536 "2020-07-08T12:30:33Z")
EDIT\*\* UGH. nvm lol… I just plugged in the antennas that came in the box.. poof works. But I thought they had a built in on-chip antenna as well as the connector antenna?.. this was literally like a multiple day issue an… --- ## [PAN ID best practices](https://forums.digi.com/t/pan-id-best-practices/20158)
**Author:** [@markfsidell](https://forums.digi.com/u/markfsidell)\ **Replies:** 0\ **Last updated:** [January 10, 2019, 1:31pm UTC](https://forums.digi.com/t/pan-id-best-practices/20158 "2019-01-10T13:31:59Z")
We want to configure our devices and gateways with a custom PAN ID, so that devices connect to our gateways only. However, in some installations we may have gateways that are within radio range of each other and devices.… --- ## [How to return a list of available Networks, C++](https://forums.digi.com/t/how-to-return-a-list-of-available-networks-c/18637)
**Author:** [@sahamrick](https://forums.digi.com/u/sahamrick)\ **Replies:** 1\ **Last updated:** [August 14, 2017, 3:45pm UTC](https://forums.digi.com/t/how-to-return-a-list-of-available-networks-c/18637 "2017-08-14T15:45:17Z")
Greetings, I’m working on an wireless communication system between a transmitter and up to two receivers. We are building an application on Windows 10 IOT (running on a raspberry pi), and what I want is for the user to… --- ## [Keep communication flowing with two xbee senders](https://forums.digi.com/t/keep-communication-flowing-with-two-xbee-senders/18084)
**Author:** [@chiappero](https://forums.digi.com/u/chiappero)\ **Replies:** 4\ **Last updated:** [March 3, 2017, 10:34am UTC](https://forums.digi.com/t/keep-communication-flowing-with-two-xbee-senders/18084 "2017-03-03T10:34:22Z")
Hello everyone, here’s the configuration i’m trying to build : There is two main receivers that are continuously receiving important frames ( no loss is tolerated ) and there is one main station in charge of sending th… --- ## [Weak DigiMesh connections only go one way?](https://forums.digi.com/t/weak-digimesh-connections-only-go-one-way/17962)
**Author:** [@jbacks](https://forums.digi.com/u/jbacks)\ **Replies:** 3\ **Last updated:** [February 8, 2017, 9:23am UTC](https://forums.digi.com/t/weak-digimesh-connections-only-go-one-way/17962 "2017-02-08T09:23:43Z")
Hi, I have a network of XBee-PRO 900HP S3B modules with DigiMesh 200Kbps firmware ver. 8074. For part of this network, I have a module seated in a tree (u.FL version connected to a dipole antenna) that communicates with… --- ## [Discover Xbee Devices with ConnectPort X4](https://forums.digi.com/t/discover-xbee-devices-with-connectport-x4/17859)
**Author:** [@cellsar](https://forums.digi.com/u/cellsar)\ **Replies:** 1\ **Last updated:** [January 6, 2017, 8:41am UTC](https://forums.digi.com/t/discover-xbee-devices-with-connectport-x4/17859 "2017-01-06T08:41:45Z")
Using the ConnectPort X4 Configuration and Management, in XBee Networks,i try to discover XBee Devices (The X4 is set as a coordinator and trying to discover a XBee 232 Adapter ZB Pro S2B) but it doesn’t find the device. … --- ## [XBee pro s2b and XBee peo s2c communication](https://forums.digi.com/t/xbee-pro-s2b-and-xbee-peo-s2c-communication/17797)
**Author:** [@Shine\_J](https://forums.digi.com/u/Shine_J)\ **Replies:** 3\ **Last updated:** [December 23, 2016, 11:36am UTC](https://forums.digi.com/t/xbee-pro-s2b-and-xbee-peo-s2c-communication/17797 "2016-12-23T11:36:24Z")
Hi! I’m working on a project but it seems that my 2 modules are not communicating. At first, using test terminals the modules are ok but as the s2b send a message but the s2c are receiving extra unwanted characters. I t… --- ## [Two Way Communication by XBee Pro S2B](https://forums.digi.com/t/two-way-communication-by-xbee-pro-s2b/17392)
**Author:** [@Bhimaji\_Nehe](https://forums.digi.com/u/Bhimaji_Nehe)\ **Replies:** 4\ **Last updated:** [September 18, 2016, 1:57am UTC](https://forums.digi.com/t/two-way-communication-by-xbee-pro-s2b/17392 "2016-09-18T01:57:42Z")
Hi Xbee Community I am trying to use two XBee PRO S2B to communicate two arduino UNO to each other.I have configer XBee PRO S2B by XCTU one is Xbee Router AT Firmware 22A7 and other Xbee Co ordinator Firmware20A7 F… --- ## [XBee Sensor compatible with proprietary network?](https://forums.digi.com/t/xbee-sensor-compatible-with-proprietary-network/16419)
**Author:** [@tia302](https://forums.digi.com/u/tia302)\ **Replies:** 1\ **Last updated:** [March 14, 2016, 8:52am UTC](https://forums.digi.com/t/xbee-sensor-compatible-with-proprietary-network/16419 "2016-03-14T08:52:12Z")
We currently have a proprietary Zigbee network where all the devices are ours and we have a proprietary protocol. The XBee is configured with AO = 0 and we receive packets from our devices using frame type 0x90. I’ve be… --- ## [extend range of XBee network](https://forums.digi.com/t/extend-range-of-xbee-network/16221)
**Author:** [@rgalecki](https://forums.digi.com/u/rgalecki)\ **Replies:** 1\ **Last updated:** [February 8, 2016, 1:51pm UTC](https://forums.digi.com/t/extend-range-of-xbee-network/16221 "2016-02-08T13:51:47Z")
Hi, I recently purchased the Xbee Pro 900HP Dev kit. I’m building an Xbee network in an industrial plant. What is the most cost effective way to get repeater nodes in between? The network consists of: Several devic… --- ## [What module I need to use?](https://forums.digi.com/t/what-module-i-need-to-use/16011)
**Author:** [@mbolivar](https://forums.digi.com/u/mbolivar)\ **Replies:** 1\ **Last updated:** [January 4, 2016, 1:26am UTC](https://forums.digi.com/t/what-module-i-need-to-use/16011 "2016-01-04T01:26:42Z")
Hello, I need to set up a sensor network for an hotel. Each room will have a central node + some RF sensors + some RF actuators. I would like to do a point-to-point communication from the sensors to the central room no… --- ## [Will this XBee network function with routers coming in and out of range?](https://forums.digi.com/t/will-this-xbee-network-function-with-routers-coming-in-and-out-of-range/14167)
**Author:** [@Paul\_Jurczak](https://forums.digi.com/u/Paul_Jurczak)\ **Replies:** 1\ **Last updated:** [January 14, 2015, 2:23pm UTC](https://forums.digi.com/t/will-this-xbee-network-function-with-routers-coming-in-and-out-of-range/14167 "2015-01-14T14:23:03Z")
I would like to use XBee ZB modules (XBee-PRO ZB if needed for extended range) to implement communication network between mobile robots outdoors in suburban park environment. The coordinator node {c} will be stationary a… --- ## [are directions you linked for use w/ single end-point](https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353)
**Author:** [@ClAIntegration](https://forums.digi.com/u/ClAIntegration)\ **Replies:** 1\ **Last updated:** [August 4, 2014, 2:47pm UTC](https://forums.digi.com/t/are-directions-you-linked-for-use-w-single-end-point/13353 "2014-08-04T14:47:20Z")
w/ 4 buttons or can they also be applied to 4 separate end-points w/ 1 button each? --- ## [Can I use Intel Galileo (with Digi Xbee S2) as Gateway (with Arduino XBee end points) to Connect to Digi DeviceCloud?](https://forums.digi.com/t/can-i-use-intel-galileo-with-digi-xbee-s2-as-gateway-with-arduino-xbee-end-points-to-connect-to-digi-devicecloud/13279)
**Author:** [@rsutaria](https://forums.digi.com/u/rsutaria)\ **Replies:** 0\ **Last updated:** [July 8, 2014, 6:25am UTC](https://forums.digi.com/t/can-i-use-intel-galileo-with-digi-xbee-s2-as-gateway-with-arduino-xbee-end-points-to-connect-to-digi-devicecloud/13279 "2014-07-08T06:25:31Z")
We are interested in using the Digi Device Cloud Etherios in our solution which is being built as follows: We have the Intel Galileo board acting as a Gateway on which we have installed the Digi Cloud Connector (Embedd… --- ## [connectport X4 xbee no network address](https://forums.digi.com/t/connectport-x4-xbee-no-network-address/12299)
**Author:** [@liudr](https://forums.digi.com/u/liudr)\ **Replies:** 1\ **Last updated:** [December 18, 2013, 8:13am UTC](https://forums.digi.com/t/connectport-x4-xbee-no-network-address/12299 "2013-12-18T08:13:39Z")
I am just a beginner. I have a connectport X4 with xbee pro 900 digimesh and two xbee pro 900 digimesh radios and arduino shields to power them. At the get go, I was able to send messages between the two radios. Once I c…