# \#xbee-sleep-line

**URL:** https://forums.digi.com/tag/xbee-sleep-line/1142.md

[Latest](https://forums.digi.com/latest.md) · [Categories](https://forums.digi.com/categories.md) · [Tags](https://forums.digi.com/tags.md)

---

## [Output DIO5 returns to its default state (low) when the module enters in sleep mode!!!](https://forums.digi.com/t/output-dio5-returns-to-its-default-state-low-when-the-module-enters-in-sleep-mode/12568)

<div class="topic-metadata">

**Author:** [@patmic](https://forums.digi.com/u/patmic)\
**Replies:** 4\
**Last updated:** [November 10, 2014, 4:07am UTC](https://forums.digi.com/t/output-dio5-returns-to-its-default-state-low-when-the-module-enters-in-sleep-mode/12568 "2014-11-10T04:07:58Z")

</div>

Hello, I’m using 2 XBees serie 1 in IO line passing. One is Coordinator and one is End Device. When my End Device enters in cyclic sleep mode, the output DIO5 returns to its default state (low) while the others output…

---

## [XBee 802.15.4 sleep remotely](https://forums.digi.com/t/xbee-802-15-4-sleep-remotely/13601)

<div class="topic-metadata">

**Author:** [@progloverfan](https://forums.digi.com/u/progloverfan)\
**Replies:** 1\
**Last updated:** [September 16, 2014, 4:28pm UTC](https://forums.digi.com/t/xbee-802-15-4-sleep-remotely/13601 "2014-09-16T16:28:38Z")

</div>

Hi. I need to know if is possible to sleep remotely the XBee end node using SM=1 or SM=2 only configuring it in the XCTU this command remotely. Or it requires to manipulate XBee pins before?, I’m not sure how it works. …