BACnet for Rabbit systems

If anyone is interested in using Rabbit based systems for Building Automation/HVAC/Home Automation applications they might like to take a look at the project I have set up on Sourceforge at https://sourceforge.net/projects/bacrabbit/.

This a port to Dynamic C of the existing standard C BACnet stack (https://sourceforge.net/projects/bacnet)

The initial port targets the Rabbit BL4S100 single board computers using BACnet/IP but it should be easy enough to get it working with other Rabbit products.

BACnet is an industry standard protocol for communications in Building Automation applications and is supported by all the major BMS manufacturers.

Regards,
Peter