Downloading program using DLM_TCP and DLP_TCP programs

I am able to run DLM_TCP and ftp DLP_TCP into FLASH2, crc check is OK.
Switching then occurs and DLP_TCP takes over as the running program. I
can then telnet in DLP_TCP to transfer control back to DLM_TCP OK but
as DLM_TCP runs and checks the resident program in FLASH2 it comes up
with a CRC error since its crc is not the same as the stored crc from
the ftp download. Can you help please
Mike Brothers

if error logging is enabled, errors are written to FLASH, hence CRC changes