How to get data from end device.

XBee & XBee Gateway XBee - 802.15.4
#1

Hi, i did setup coordinator with 2 endpoint devices with Node Identifier. End devices are setup with analog input in A01 on both devices.

My router are connected with micro controller and endpoint devices are stand alone. I did setup all of them using X-CTU.

i am aiming to set destination node from coordinator and call for data instead of endpoint send data on every interval. Is that possible to achieve.

#2

I have not understood your network setup well but I can say that zigbee has a sampling method called ‘Queried Sampling’.

Under this method, the end device will send sample information only when it is queried by other module using an API frame. Its available in detail in product manual.