ikev2 status from CLI

Digi TransPort WR (Series)
, ,
1

CLI commands:
I have a Digi that is using IKEV2 and I want to check the IKEV2 SAs, I get this:
CORS15>ikestat
No IKE SAs
OK
This works fine:
CORS15>sastat
IPsec SAs (total:1). Eroute 0 -> 4
Outbound V1 SAs
List Empty
Inbound V1 SAs
List Empty
Outbound V2 SAs
SPI Eroute Peer IP First Rem. IP Last Rem. IP First Loc. IP Last Loc. IP TTL KBytes Left VIP
857042d8 0 103.205.244.106 1.1.1.10 1.1.1.10 2.2.2.15 2.2.2.15 8022 0 N/A
Inbound V2 SAs
SPI Eroute Peer IP First Rem. IP Last Rem. IP First Loc. IP Last Loc. IP TTL KBytes Left VIP
eceb4f37 0 103.205.244.106 1.1.1.10 1.1.1.10 2.2.2.15 2.2.2.15 8022 0 N/A
OK

So how do I get the ike2 SAs from the CLI?

Cheers,
John

2

Is there a ikev2stat X command in the Digi?
If not, why not?
There’s an ikestat command. An sastat command, why not ikev2stat command?

Cheers,
john