imx53 PMIC & power group

lambrio July 22, 2016, 11:24am 1

Hello,

it’s possible to setup IPU_CSI Power group from 2.7V to 3.3V via PMIC?

Or this power group work only on 2.7V ?

Best regards,

Oscar

Topic		Replies	Views
i.MX53 pin setup 3.3V Linux i , mx53	0	316	July 20, 2016
imx53 gpio 2.7V drive with 3.3V Linux connectcorewi-imx53	0	347	July 22, 2016
[CC6UL]: 3.3V input voltage for VSYS and VSYS2 Linux regulator , imx6 , cc6ul-sbc , supply-voltage	1	552	November 6, 2017
Input Supply Voltage Linux hardware	1	454	March 20, 2008
Custom PCB for Wi-i.MX53 Embedded Devices i , imx53 , pcb , mx53	1	553	September 2, 2014