IX10 to WR21 IPsec issues

Digi TransPort WR (Series)
, ,
1

Tring to get a Digi IX10 and WR21 configuration with an IPsec tunnel
Having trouble and not sure what else to do…

Here is the event log on the WR21
5:33:02, 27 Aug 2021,(4364) IKE SA Removed. Peer: IX10,Negotiation Failure
15:33:02, 27 Aug 2021,(4365) IKE Notification: No Proposal Chosen,TX
15:33:02, 27 Aug 2021,(4365) New Phase 2 IKE Session 174.90.198.175,Responder
15:33:02, 27 Aug 2021,(4364) IKE Keys Negotiated. Peer: IX10
15:33:02, 27 Aug 2021,(4364) New Phase 1 IKE Session 174.90.198.175,Responder
15:31:01, 27 Aug 2021,(4361) IKE SA Removed. Peer: IX10,Negotiation Failure
15:31:01, 27 Aug 2021,(4362) IKE Notification: No Proposal Chosen,TX
15:31:01, 27 Aug 2021,(4362) New Phase 2 IKE Session 174.90.198.175,Responder
15:31:01, 27 Aug 2021,(4361) IKE Keys Negotiated. Peer: IX10
15:31:01, 27 Aug 2021,(4361) New Phase 1 IKE Session 174.90.198.175,Responder

2

From a simple guess I would suspect your Phase 1 settings are different on both devices.

You would want to check that both Phase 1 and phase 2 settings are the same.

Post sanitised (password and users removed) “config c show” (WR21) and “show config” (IX10) if you need assistance to pin point the issue or contact Digi support.

Nicholas Wilson
Your IoT
https://www.YourIoT.com.au