LCD Driver Code Share please

Hello,
I was wondering if any one had or knows of and Dynamic C code to drive a 4x20 HD44780 type LCD they want to share please.
Many thanks in advance IMK

I didn’t use a 4x20 but I did use two 2x40 that’s compatible with the HD44780 and I’m going to guess they are quite similar. The attached file should be decently commented so you can see what I did.

Joshua

[QUOTE=joshpc99;391]I didn’t use a 4x20 but I did use two 2x40 that’s compatible with the HD44780 and I’m going to guess they are quite similar. The attached file should be decently commented so you can see what I did.

Joshua[/quote]

Joshua,
Many many thanks this will save me hours of work, as I am currently just about to grips with the ADC and an acceleromter. And was not looking forward to the LCD driver, I will let you know how I get on.
And again many thanks Ian

The code is not present in the server anymore?

Is this code working also with the Rabbit BL4S100 board?
If not, what are the needed changes (if easy to explain)?