I want to setup a network with 30 xbee’s S2C , the area is big and has many rooms , every room has one end devise, one coordinator is center of the area , But problem is the signal of the end devise is not comes far away to the coordinator is located , What is the solution for it and what should i do ?
IF you are using the Zigbee mesh code, then you can add Wall routers to extend the range of the network. This will allow end devices that are out of range to connect to the network and send/receive data. Not to mention, a Coordinator or router can only support up to 20 end device children. So you would need to have at least one router in addition to your network just to have 30 sleeping end device children on your Zigbee network.
1 Like