Hi,
I’m working with a 9210 module.
My goal is simple: I want to be able to modify files in the module.
I discovered that it was using squashfs which is read-only.
So I created a rootfs project and choose “non-squashfs” format.
After I tried to upload this through UBOOT with TFTP. I discovered
that my partition was too small. So I changed it.
Here is my new partition map:
Nr | Name | Start | Size | Type | FS | Flags
0 | U-Boot | 0 | 192 KiB | U-Boot | | fixed
1 | NVRAM | 192 KiB | 128 KiB | NVRAM | | fixed
2 | Kernel | 320 KiB | 1280 KiB | Linux-Kernel | |
3 | RootFS-JFFS2 | 1600 KiB | 2 MiB | Filesystem | JFFS2 | rootfs
4 | User-JFFS2 | 3648 KiB | 448 KiB | Filesystem | JFFS2 |
I have updated the rootfs
CME9210 # update rootfs tftp rootfs-cme9210js-64.jffs2
TFTP from server 192.168.0.33; our IP address is 192.168.0.9
Filename ‘rootfs-cme9210js-64.jffs2’.
Load address: 0x200000
Loading: #################################################################
#################################################################
######
done
Bytes transferred = 1928464 (1d6d10 hex)
…
Now, if I boot the system something goes wrong with JFFS2 (see below).
The scan_eraseblock function generates this error message. And I think its strange that the address does not correspond to the rootfs memory space. But I can’t tell if this is correct or not.
Could someone please help me ?
Thank you very much
Thierry
Uncompressing Linux…
… done, booting the kernel.
Linux version 2.6.26.6-del-4.2-RevA (buildd@log-sln-build1) (gcc version 4.0.3)
#1 Thu Oct 9 19:44:56 CEST 2008
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Digi Connect ME 9210 on Devboard
…
Kernel command line: ip=192.168.0.9:192.168.0.33:0.0.0.0:255.255.255.0:cme9210js
:eth0:off console=ttyNS0,38400 mtdparts=physmap-flash.0:0x30000(U-Boot),0x20000@
0x30000(NVRAM),0x140000@0x50000(Kernel),0x200000@0x190000(RootFS-JFFS2),0x70000@
0x390000(User-JFFS2) root=/dev/mtdblock3 rootfstype=jffs2 rw
…
Memory: 8MB = 8MB total
Memory: 5752KB available (2056K code, 169K data, 96K init)
…
squashfs: version 3.3-CVS (2008/04/04) Phillip Lougher
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
…
Creating 5 MTD partitions on “physmap-flash.0”:
0x00000000-0x00030000 : “U-Boot”
0x00030000-0x00050000 : “NVRAM”
0x00050000-0x00190000 : “Kernel”
0x00190000-0x00390000 : “RootFS-JFFS2”
0x00390000-0x00400000 : “User-JFFS2”
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
IP-Config: Complete:
device=eth0, addr=192.168.0.9, mask=255.255.255.0, gw=255.255.255.255,
host=cme9210js, domain=, nis-domain=(none),
bootserver=192.168.0.33, rootserver=192.168.0.33, rootpath=
JFFS2 warning: (1) jffs2_sum_scan_sumnode: Summary node crc error, skipping summ
ary information.
jffs2_scan_dirent_node(): Node CRC failed on node at 0x00000558: Read 0x00000000
, calculated 0x7336a5dc
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000594: 0x0001 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000598: 0x41ed in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000005a4: 0xda1f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000005a8: 0xda1f in