Use RCM4310 with old 2mm serial programming cable.

Rabbit
1

Hi all,

I am using Dynamic C 10.46 IDE, and using my old 2mm serial programming cable to program my RCM4310 board(by building a converter socket pin), but it couldn’t work, is the 2mm serial programming cable similar with the new USB programming cable?

Regards,
winston.

2

The schematic for the 2mm cable is available here.
The schematic for the 1.27mm cable is available here.

At first glance the pin functions both look to be the same.

I don’t know if the programming sequence is the same however.