Hi all
i need help on how to code this project.
i’m to set up a network having 3 different nodes
Node A: consist of arduino, xbee radio, turbidity sensor and temperature sensor.
Node B: consist of arduino, xbee radio, turbidity sensor and temperature sensor.
Node C: consist of arduino, xbee radio and LCD screen
aim is that node A collect data and send to Node C. Node B likewise collect data and send to Node C and result shown on LCD screen
Thanks
May I suggest you first take the radios out of this and get it working with a cable between the units?
This is also something that is most likely best asked on an Arduino forum. Especially since the radio in this case is nothing more than a cable or way to send the data from device A, B and C.