I have installed the pkg 40002486_a.bin, but when I run the mpi command to install the board into the kernel the function key F5 does nothing. No kernel relink! The board does show up during the hw command
The driver you need can be found here:
http://www.digi.com/support/productdetl.jsp?pid=1415&osvid=110&tp=1&s=0
As far as installing in SCO Openserver 6, this is not done through custom but by doing "pkgadd -d /path-to-driver/40002486_b.bin
Intel motherboards had a bios bug that the “b” version driver works around. You may be seeing this bug so I’d recommend installing that instead.
I did install the package using the pkgadd command. I attached a file that contains the drivers from this site.
???
You said you installed the 40002486_a.bin driver. The link I provided is for 40002486_b.bin, which has a workaround that may very well fix the problem you’re seeing. If the rev. B version doesn’t get this up and running I’d recommend calling Tech Support so we can look at this more indepth.
Your F5 key probably doesn’t map correctly.
MPI offers a way around that, by letting you
do a “Ctrl-F”, then press “5”.
Message was edited by: scottk