Antenna Problem


hey, guys
i have just registered this forum and i have many many things to ask but i want to start with my current problem…

i have a few XBee Pro S2B modules with wire antenna with the code XBP24BZ7WIT-004J. but in my project, it revealed that i need a closed box and the antenna should be out of the box :frowning:

Is it possible to remove my wire antenna from my module and replace it with a UFL or RP-SMA by soldering properly??

No - because the antennas are calibrated differently. Doing this would cause the radios to perform poorly and have next to no range. In addition, it voids the warranty of the radios.