[AnyWhereUSB] Monitoring power supply?

USB
, ,
1

Hello,

It’s possible to monitoring the two power supply in AnyWhereSUB product via SNMP or other?

Thank’s in advance

2

The only traps that are available are discussed in the AnywhereUSB Installation Guide

which Anywhere USB are you referring to. If it is AUSB/14 then the two power supply is for the failover connection.

3

Hi,

I do not understand your answer.

It’s possible to monitoring the two power supply via SNMP protocol?

4

Unfortunately, SNMP functionality is limited for the AnywhereUSB G2 models.

  1. The only traps that are available are discussed in the AnywhereUSB Installation Guide

  2. The Alarm functions are applicable to the DB9 serial port, if you’re using the RealPort driver to connect that serial port to a computer over the network.

3.Digi do not offer any MIBS for AUSB at this time.

5

Ok, it’s not possible.

Thanks for your response