¿can I send a analog audio whit the XBee-PRO stand-alone 802.15.4 RF modem?

Digi Remote Manager Device Manager
1

greatings

I have a radio receptor and I want to send the audio to my PC using the XBee-PRO stand-alone 802.15.4 RF modem ¿it is posible? the band wide of the audio is 3 KHz.

thank you for any tips that you can give to me

2

Hi laah80,
I have a few suggestions.
-set a PAN ID on the modules to something other than the default (3332).
-set each modules DH to the other devices SH.
-set each modules DL to the other devices SL.
-set each BD (baud rate) to 7 (115.2k)
-set each D6 to 1. That will enable flow control.