Hi All:
Brand new WR44, event log filling up with this:
14:05:48, 15 Sep 2020,Certificate Code Error
Lib: SSL routines
Func: ssl3_read_bytes
Reason: sslv3 alert certificate unknown
How can I fix this?
Cheers,
john
Hi John,
the ‘certificate code error’ shown in eventlog, is due to the fact that the router is using a self signed certificate and if you use Chrome to access the router over HTTPS, the browser is sending an alert to the router that the certificate is not from a known trusted CA.
If you were to install a certificate on the router from a known trusted CA then this would not happen.
You can safely ignore the message, or you can filter it so it is not shown in eventlog anymore with the following command:
event 0 ev_filter 98
For other eventlog edit info you can see here: https://www.digi.com/resources/documentation/digidocs/90001019/default.htm#tasks/t_edit_event_descriptions.htm%3FTocPath%3DConfiguring%2520alarms%2520|Edit%2520event%2520descriptions%2520|_____0
If you have any further questions, please contact us at tech.support@digi.com or visit our website to see Digi Support options: https://www.digi.com/support
Best regards,
Anny
Digi Technical Support
I actually fixed this by loading up the most recent FW.
After I did that, message gone.
Cheers,
John