Communicate HA zigbee sensor with xbee series 2

XBee & XBee Gateway XBee Gateway
,
1

Hi all.
I have bought a sensor of 4-noks company that uses Home Automation Profile and algo one Xbee series 2 and the USB Adapter. In order to communicate I have to create a network as coordinator with the Xbee but it does not found the sensor in order to connect themselves. Any help will be gratefull

2

Try setting the ZS to 2, The KY to 0x5A6967426565416C6C69616E63653039, EO to 2 and EE to 1. Keep in mind that this may not work as the XBee ZB modules are not support the HA profile where as the XBee SMT ZB do support some HA functions.

3

Thanks for your answer. I have implemented those variables as you told me and then I let the module scan but It does not found the sensor.
Any idea on how to solve this or you think that it is just that the module does not support communication with the sensor?

Regards and thanks

4

Thanks for your answer. I have implemented those variables as you told me and then I let the module scan. It does not found the sensor but the sensor get his led in green fixed which means that the sensor is joined into a network.
I suppose that now both devices are joined no? Now I am trying to send frames to the sensor like:
7E 00 19 11 01 00 00 00 00 00 00 FF FF FF FE 00 00 00 00 01 04 00 00 00 01 00 04 00 E8
which is supposed that it will ask to the sensor for an instantaneous demand of power but what I receive is just a transmit status:
7E 00 07 8B 01 FF FE 00 00 00 76

Am I making something wrong?

Regards and thanks