Connect usb key-license for CAD application

USB Edgeport
1

Hi,

Is possible with AnywhereUSB connect a usb key-license for CAD application and assign this usb key to VM?
I have a ESX 3.0.1.

Thanks,

Jordi.

2

Hi,

Yes, you can do that on ESX, it’s probably the most common application in use for our AnywhereUSB.

I’m sure you’re aware that ESX does not support USB so keep in mind you’ll have to do the following before adding the AnywhereUSB hardware.

http://ftp1.digi.com/support/documentation/aw_usb_vmware.txt

Please let me know if you need further assistance.