ConnectCore : getting the message 'Connectiong to Desktop' when booting the OS

Embedded Devices Windows CE
1

I’m using a ConnectCore Wi-MX53 to develop with Windows Embedded Compact 7.
When loading wce-CCMX53 either from TFTP or from a microSD i get a blocking message ‘Connection to desktop’ and then nothing…

Does anyone already get this message?
I tried ‘envreset’ to reset the environnement variable, but still having the problem

Here is the data received on the console:

CCWMX53 # dboot wce tftp
FEC: enable RMII gasket
Using FEC0 device
TFTP from server 192.168.21.111; our IP address is 192.168.21.225
Filename 'wce-CCXMX53'.

         #################
done
Bytes transferred = 21714831 (14b578f hex)
Unzipping:   complete
Windows CE will be booted now
Windows CE Kernel for ARM (Thumb Enabled)
ConnectCore Wi-i.MX53 by Digi International Inc. v3.3.7.2511 Windows Embedded CE 7.0 Built on May 23 2012 at 17:57:50
OEMInit:  silicon rev = 0x21
[OEMInit]: Built for i.MX53 JumpStart Kit Deö•±½Áµ•¹ÑBoard (30013722-01)
[OEMInit]: Force clean boot
[KITL_Init]: KITL_ETHERNET
OEMKitlStartup: DeviceId=CCWi-iMX5346767
OEMKitlStartup: IP=192.168.21.225 Netmask=255.255.255.0
g_kitlLock = 0x82BB80C0
FECInit MAC ADDR 0:40:9D:58:B6:AF
FEC is linked,  Speed  100Mbps , Full Duplex
KITL will run in interrupt mode
VBridge:: built on [May 24 2012] time [09:53:10]
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0x82BB94C0] to [0x82BBD4C0].
Rx buffer [0x82BBD4E0] to [0x82BC14E0].
VBridge:: NK add MAC: [0-40-9D-58-B6-AF]
Connecting to Desktop

Here is my environment:

bootdelay=4
baudrate=115200
loadaddr=0x70800000
silent=no
ethprime=FEC0
ethact=FEC0
filesize=512
bootcmd=dboot wce mmc 1:1 fat
ethaddr=00:40:9D:58:B6:AF
wlanaddr=00:40:9D:58:B6:85
eth1addr=00:40:9D:58:B6:DC
ipaddr=192.168.21.225
ipaddr_wlan=192.168.43.30
ipaddr1=192.168.42.31
netmask=255.255.255.0
netmask_wlan=255.255.255.0
netmask1=255.255.255.0
serverip=192.168.21.111
gatewayip=192.168.21.254
dnsip=192.168.21.16
dnsip2=0.0.0.0
dhcp=off
dhcp_wlan=off
dhcp1=off
mtdids=nand0=onboard_boot
mtdparts=mtdparts=onboard_boot:0x100000(U-Boot),0x80000@0x100000(NVRAM),0x100000@0x180000(Splash),0x2800000@0x280000(Kernel),0x1d580000@0x2a80000(Filesys)
stdin=serial
stdout=serial
stderr=serial

Environment size: 688/8188 bytes
2

The kernel image you are loading has KITL enabled. The message means that the kernel is waiting for the desktop’s debugger to connect before continuing. If you’re not trying to debug your kernel, then check your catalog and make sure that you have KITL removed. Rebuild, and then it should work.