Elimination of Many-to-One Route Request Indicator Frame

I am currently experimenting with two XB3-24Z8ST-J radios but I am eventually going to have 8 total. For my purposes, the Many-To-One Route Request Indicator Frame is a bit of a nuisance and I am wondering how to permanently eliminate it? I have the AR parameter on both radios set as 0xFF and both are operating in API1 mode. It seems that everytime I issue an ATFR frame to reset the coordinator XBEE, that the coordinator sends the Many-To-One indicator or when the coordinator sends its first transmit frame after initial powerup. I would rather not have to deal with unesesary frames if possible.


It sounds like you have encryption enabled. Is that correct?