I have configured
HQ network: 192.168.0.0/24 (WR44)
Remote site 1: 192.168.1.0/28 (WR11)
Remote site 2: 192.168.1.16/28 (WR11)
but this is not sufficient.
What should I do?
Hi
This document covers this type of configuration
http://ftp1.digi.com/support/documentation/AN_010_IPSec_Over_Cellular_using_Digi_Transport_Routers.pdf
if you use 2 eroutes on the HQ site that matches the 2 diffrent remote subnets
and on the wr11 you set it up the same with the local subnet being set to the lan address you want to use.
if you want the networks to be able to communicatio such as wr11 to wr11 through HQ you will have to cahneg the remote subnet to be large enough to include the HQ and Remote sites
192.168.0.0/23
regards
james