In the starter kit datasheet, (https://www.digi.com/pdf/connectcore-for-imx6ul-starter-kit.pdf) it is stated: “DISPLAY 8-bit LCD Parallel (optional, via expansion connector)”.
Do you have more info on how this is done ?
1 Like
HARDWARE REFERENCE MANUALS
ConnectCore 6UL Module
http://ftp1.digi.com/support/documentation/90001523.htm
Pages 33-51 are listing Castellaed pads. Search for anything that has LCD_
60 / A18 CPAD60 LCD_DATA0
68 / A10 CPAD68 LCD_DATA1
66 / A12 CPAD66 LCD_DATA2
61 / A17 CPAD61 LCD_DATA3
58 / A20 CPAD58 LCD_DATA4
64 / A14 CPAD64 LCD_DATA5
62 / A16 CPAD62 LCD_DATA6
63 / A15 CPAD63 LCD_DATA7
56 / C21 CPAD56 LCD_CLK
57 / B21 CPAD57 LCD_HSYNC
67 / A11 CPAD67 LCD_VSYNC
59 / A19 CPAD59 LCD_RESET
69 / A9 CPAD69 LCD_ENABLE