Is the Digi XBee Cellular LTE Cat 1 able to xfer data from Arduino -> ThingSpeak DB?

I cannot find any examples that use the DIGI XBee Cellular LTE Cat 1 going from Arduino or equivalent using MQTT to communicate with ThingSpeak. I know there are hardware level shifting issues but those are handled, and I have the Eval Kit. Can anyone point me in the right direction to a software example?


T. M.

No I am not aware of any examples for that as the XBee Cellular modules are simply too new. But best guess is that either you need to use transparent mode or develop a new Library as the XBee cell uses a different API interface than the other XBee modules do.

The IoT example from mouser might help you:

1 Like