LCD on programmable xbee (zigbee)


Is it possible to operate a little display with the programmable xbee zigbee(S2C)?
For example something like this:

Additional question:
Is there a programmable version available or planned for the Xbee zigbee S2D?

Thanks & BR,

You will need to check with Adafruit what kind of interface it uses. If it is a UART and 3V CMOS level, it would work.

As for your S2D question, you will need to check with Digi Sales.

1 Like

Thank you for your answer. It seems to support 3v logic levels.
I have checked on their site; it is SPI, not UART

Looks like the S2C Programmable does support SPI Master mode if you configure it properly. So it should work.