Mesh network firmware

As part of a university degree validation project I have a problem to configure a data transmission by mesh network I do not know which firmware to use to configure it. The basic configuration works but I do not have the possibility to put the same DigiMesh firmware and with it impossible to see the view of the network. It is also not possible to configure the PLCs in S2C mode. So I don’t know what firmware to use to create this one. I have 3 XBee S2C (development kit) and 2 XBee S2.

Since you are mixing XBee S2C and XBee S2 modules, you should use the Zigbee (ZB) firmware options.