Problem with AT command

Hello ,everyone !
Hi, my programmable xbee is XBP24BZ7UITB-003,I uploaded App32Transparent application but after some time device stopped responding to AT commands.
“+++” works, “ATCN” works, but after ATID I’ve got “~…IDi” and
atsh got “~…SH[” .I can’t get the right response with AT command ; However ,with Show Api Off there is nothing on the UART after sending command.

  I've uploaded program once again but it didn't helped. What can I  do with problem?

Problem solved!! The XBEE module should worked in API mode !Thanks for everyone