Serial Communication for 5600W

Hi, can the Serial Port Interface of 5600W be used with an ADC for serial communication?.. when i go through the samples its interfacing with RS232 is it mainly for communication from the PC to the module?..

mm… basically i need an adc to interface with rabbit module RCM5600W any to recommend guys?

ADC’s come with several communication methods. I2C, spi and parallel to name the most common ones.
So check out the I2C and SPI samples.
I2C works great on the rabbits, SPI used to have its problems.
good luck…

thanks fietspomp for your reply… mm… do i need the serial communication accessory board to run the samples?..