Series 2 Xbee not receiving Zigbee Transmit Status Response after Zigbee Transmit Request.

XBee & XBee Gateway
, , ,
1

From Xbee Series 2 with END DEVICE API firmware 29A7 I am sending Zigbee Transmit request to coordinator (address 0x0000000000000000) with Frame id 0x01 and options 0x00.

But I am not receiving any Zigbee Transmit response.

What could be the reason for this.

2

What is the full API frame you are sending to the UART of your End device?

Is the Coordinator outputting the data?