HI guys,
I have VERY simple data that I need to transfer over a pair of XBEE’s
I have a series of switches and contacts that are either off or on. All I want to do is setup a data I/O port on a remote XBEE to be mimicked on another XBEE in my module. So If the switch pulls the I/O pin high on the remote XBEE I want the Xbee in my module to pull its corresponding pin high so that a micro controller can read that as a high pin.
I understand that this is doable, but cannot find anywhere in the manual for the XBEE as to how to configure it. My XBEE’s are in the mail right now so I don’t have the configuration software to actually play with yet.
Any help would be great,
Cheers,