UART lines on the Xbee keep dropping to about 1.7 V? TX and RX are not at Vcc as I expected

Bummibaer March 25, 2015, 9:28am 2

Do you have connected to the right host pins(TX In,RX Out)? First switch the connections.

Topic		Replies	Views
UART lines on the Xbee keep dropping to about 1.7 V? Is this something to worry about. XBee & XBee Gateway xbee	9	586	March 25, 2015
Xbee UART data line voltage drops XBee - DigiMesh xbee , drop	1	441	November 16, 2015
Xbee connection XBee - 802.15.4	2	607	January 4, 2009
Xbee S1, accidentally plug the IO0 (pin 20) and the IO4 (pin11) to VCC (3.3V) and GND.I broken my Xbee? XBee & XBee Gateway xbee , xb24	2	666	April 5, 2015
Xbee S2, accidentally plug the IO0 (pin 20) and the IO4 (pin11) to VCC (3.3V) and GND.I broken my Xbee? XBee Programamble (S2C & 900 HP) xbee , usb , xb24	1	527	September 3, 2015