Trying to set up the BL2600 RS232 port for commuications to a pc, using the Request to Send for flow control. I have the serial data working but do not have the RTS signal. I believe it should be “RxF” signal. I can not figure out the code to do this. I am not using the CTS signal in this communication.
Hello,
Under Dynamic C 9.62 at the below path
C:\DCRABBIT_9.62\Samples\BL2600\RS232
there is a sample application SIMPLE5WIRE.C regarding the flow control,
TxF and RxF become the flow control RTS and CTS.
For more information on this , please go through the BL2600 user’s manual at the below link
http://ftp1.digi.com/support/documentation/019-0142_M.pdf
Thanks.
1 Like