Xbee PRO S2 AND S2B communitaion problem [CHANNEL]

XBee & XBee Gateway
, , , ,
1

Hello,
I have a 2 xbee with XBP24BZ7WIT-004(ZigBee Coordinator AT) and XBP24-BWIT-OO4(ZNet 2.5 outer/End Device AT) MPN (back code). I edited their ID,MY,DH and DL for their communitaion but I could not change their CH. In forums they says Xbee do it automatically but my device cant see each other. There is parameters of devices.

ZigBee Coordinator AT
234
7FFF
3
0
FF
0
43B6
0x20
1E
0
FF
30000
3C
0
E8
E8
11
4
1
0
0

  3
  0
  0
  3
  1
  0
  64
  3E8
  2B
  20
  1
  1
  0
  0
  0
  0
  1
  1
  0
  0
  1FFF
  0
  28
  0
  0
  0

ZNet 2.5 outer/End Device AT

  234
  1FFE
  3
  FF
  0
  0
  0
  0
  E8
  E8
  11
  0x20
  0
  FF
  20000
  3C
  0
  1
  0
  0
  
  3
  0
  3
  1
  0
  0
  1388
  20
  1
  0
  1
  0
  0
  0
  0
  1
  1
  0
  0
  0
  28
  1FFF
  0
  0
  0
  64
  3E8
  2B
2

The coordinator selects the channel based off of the channel mask. If you want it to be on a different channel, then change the channel mask (CM) to eliminate the channel you do not want to use.

3

There is no channel mask(CM) in my properties.

4

Sorry that is Scan Channel (SC).