Hello
I need to configurate a Mesh Network, but I don’t know if my modules XBee PRO are serie 2, the hardware version is 1842, and the serial number is 13A200 4053C719,
thank you in advance for your help
Best Regards
Yury Sanjuan
What is the part number listed on the underside of that module, on the label? It should start XB24 or XBP24…
the number part is:
XBP24-AWI
001-revB
2008-08-05-08
thank you in advance for your help
Yury Sanjuan
This is a series 1 XBee-PRO module, so therefore can’t use the ZNet 2.5 or Zigbee mesh firmwares. You should however be able to load the DigiMesh 2.4 firmware found here:
http://www.digi.com/support/productdetl.jsp?pid=3524&osvid=0&s=378&tp=1
For others reading this thread, I consulted our compatibility factsheet before giving my reply. I’d suggest anyone wanting to convert a series 1/802.15.4 module to DigiMesh 2.4 do the same: http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=3150