recently i have brought Smart Plug and it wasn’t connected to the Xbee pro s2c (i.e coordinator ).beacon request sent by smart plug and S2c provide beacon for the beacon request,furthermore after receive the beacon smart plug has to send data req and so on as per the association process but it not sent response so that consequently it sends beacon request again…and so on it continues…
check the smart plug zigbee settings is in the same network with coordinator S2C or not
how to chk smart plug zigbee settings? where i can find it. how to change those setting if possible?
open the smart plug screw and remove the zigbee from hardware.now connect to x-ctu and check. if you need change the settings