XBee3 Micro GND pins

RogerHarrold · May 17, 2019, 9:02am

The XBee3 micro has several GND pins.
Is it necessary to ground each pin, or is it sufficient to ground Pin1?

DigiFan23 · May 21, 2019, 5:09pm

It is sufficient to just ground one, but it is recommended to ground them all.

RogerHarrold · May 22, 2019, 11:33am

Thanks for that.

Topic		Replies	Views
XBee3 network: grounding XBee - Zigbee zigbee , reference , connection , xbee3	1	312	July 31, 2020
Should I connect the RF ground pins of multiple XBee modules (RF Pad version) on the same board? Interface/Development Boards hardware , xbee , ground	1	979	March 24, 2014
Xbee S1, accidentally plug the IO0 (pin 20) and the IO4 (pin11) to VCC (3.3V) and GND.I broken my Xbee? XBee & XBee Gateway xbee , xb24	2	658	April 5, 2015
XBEE3 Micro pin plating XBee & XBee Gateway smt , xbee3	0	354	March 6, 2018
XBEE 3 Micro Module RF pad connection XBee - Hardware rf , pcb , xbee3	1	252	August 25, 2022