AnywhereUSB - drivers for Windows 2008 server & Windows VISTA

USB Edgeport
1

Drivers for Windows 2008 server & Windows VISTA. When? Веta?

2

By the end of this month. Please add your e-mail address to your profile, make it publicly visible then confirm that and we’ll let you know via e-mail when it’s available.

3

Would love to recieve these drivers, so if they are available or if there beta drivers already please let me know.

4

Good Morning. I bought a DigiPort Edge/8 (PN 301-1002-08) and tried to install it on Windows 2008 Server X64 but couldnt the Digi port is not registered. Please where can i get a edgeport driver for Windows 2008 Server

5

> By the end of this month. Please add your e-mail
> address to your profile, make it publicly visible
> then confirm that and we’ll let you know via e-mail
> when it’s available.

Already 1st April…

6

The new v2.60 AnywhereUSB driver that supports Server 2008 and Vista is now available. It’s not yet on our website though, so use one of the download links below that goes to our FTP site.

You should first uninstall the existing driver by clicking “View / Driver Information / Uninstall” in the AnywhereUSB Configuration Utility and then reboot the VM when prompted.

After Windows loads, install the Microsoft Visual C++ 2005 runtime libraries. They must be installed before installing the newer AnywhereUSB driver. These runtime libraries are included in the 40002670 and 40002668 install packages in the “Redistributable Libraries” folder.

For 32-bit Windows Operating systems: vcredist_x86.exe For 64-bit Windows Operating systems: vcredist_x64.exe

After extracting the 40002670 or 40002668 AnywhereUSB installation package to a temporary location on your hard disk, browse to the “Redistributable Libraries” folder and run the vcredist_x.exe found there. After it completes installation you may then install the AnywhereUSB drivers by running Setup.exe. Failure to do so will result in the AnywhereUSB driver installation failing and the configuration utility being unable to start properly.

Download links for the new v2.60 AnywhereUSB driver:

32-bit:
ftp://austin:!15st3n!@ftp1.digi.com/40002670.exe

64-bit:
ftp://austin:!15st3n!@ftp1.digi.com/40002668.exe

7

Good day, colleagues. Thank You for release!
But we have a problem with this drivers.

When we press to button “connect”, in Config utility, OS found the netusb device, next it found our USB-hasp key connected to AnywhereUSB device, install drivers to this hasp.

But we get a problem - USB-hasp periodically perform disconnection - reconnection to OS. Every 10 seconds. So when I run configuration utility, I see that every ~10 seconds AnywhereUSB device disappear from list and after next ~10 second appear again. And this action repeats constantly.

If I take a moment when AnywhereUSB device present in list, and when I press to “Disconnect” button, USB normally disconnect from my Host and left in list constantly (not appear-disappear)

Do you know what is problem?

P.S.
I use Windows 2008 Enterprise x64 runned on Virtual Machine in Hyper-V.

P.S.2.
When I conect this device to other host (i.e. WindowsXP) all work fine.