Cannot access configuration website for Xbee S6B.

I attempted to connect the XBee S6B to an ad-hoc network, but when I applied the configuration, the device was unable to connect. I then tried to connect to the Xbee’s network again, and access the configuration page by going to ‘192.168.1.10’, but the configuration page will not load. I receive a ‘ERR_ADDRESS_UNREACHABLE’ error in Google Chrome.

I tried to reset the device to default by pressing the commissioning button on the development board 4 times, but to no avail.

You need to Enter command mode via the terminal function and read the MY value for the IP address as it would have changed based off of the AdHoc network.

You can also restore it by issuing the ATRE command.