Could not initialize device problem

XBee & XBee Gateway XBee - Zigbee
1

Hello,everyone

I test the XBee Series2 and connect them to the PC,

I set one of them as “Coordinator” and the other as “Router”,

They can connect(I can sent information to the other)

But it shows that “Could not initialize device”,as the picture shows:
https://drive.google.com/file/d/0Bw0UOZuyGgeuNUdBTmJ1LWJ0ZVE/view?usp=sharing

Does anyone know what happened?

I have already configured the DH/DL of router with the SH/SL of the coordinator.

And the following are my configurations:

Coordinator configuration: https://drive.google.com/file/d/0Bw0UOZuyGgeuVnppM2R6dXA1bjA/view?usp=sharing

Router configuration:
https://drive.google.com/file/d/0Bw0UOZuyGgeuSUszZ2NyRmxnZ0k/view?usp=sharing

Best Regards

2

That is because the Remote Configuration option and network management functions in XCTU require the radio to support these function and for the radio to be in API mode. Right now you have both in AT or Transparent mode. So that function simply will not work while in that mode.

1 Like
3

Hi,mvut

Your answer is right and help me a lot.

I’m very appreciated!!