Digi One conversion from RS-422 to RS-232

jmyers · December 1, 2004, 5:21pm

I have an RS-422 serial device (linear footage counter) that transmits data to a PC. Is it possible to use a Digi One at the device end set to RS-422 and receive the data on another Digi One at the PC end set to RS-232 without using a separate RS-422/RS-232 converter?

RS-422Device -> DigiOne -> Ethernet -> DigiOne -> PC(RS-232)

michaelt · December 23, 2004, 5:25pm

That wouldn’t be a problem, since 232 or 422 is a local interface characteristic, and data is just data.

The Digi Ones are in effect doing the 422-to-232 conversion for you.

Topic		Replies	Views
Configuration Question Digi One SP Portserver TS	0	424	July 13, 2010
Digi One SP Ethernet to COM port Portserver TS	1	373	May 22, 2007
Difference between a Digi One and a Digi Portserver TS and Etherlite Portserver TS portserver	1	1130	September 25, 2013
convert ethernet back to serial Serial Servers & Infrastructure Mangement serial , ethernet , digiconnect	1	1257	March 2, 2015
Digi One TS H, does the serial port provide port power? Portserver TS	3	727	March 6, 2008

Digi One conversion from RS-422 to RS-232

Related Topics