Digi-One sp changes serial settings by himself from 38400 to 1200 bauds

USB Devices
1

We define the serial port basics at 38400 8N1, works fine then during the day changes to 1200 7 N1; any suggestion?

2

If using RealPort or Telnet to access the serial ports directly, something external could be changing the settings.

If this is not the case, or the problem is only seen after a reboot, then the unit should be sent to Digi for repair as it could be an indicator of bad flash.

1 Like
3

Thanks for the answer, will verify the aplication settings.