Digi Xem ttya01 locked after upgrade to FC3 ???

I run and access the ports OK via Fedora Core 2.
After upgrade to FC3, no port can be accesses, some locked file is report … What is the deal ? I re-install all ports via mpi and thing seem to work fine .
I really appreciate for any tip of … Thx .

What driver version? FC3 has a newer 2.6.x kernel that will require the latest driver.

What is the exact “locked” error?

Can you issue “ditty.dgap -a ttya01”, or do you see an error?

What is the adapter an module status shown in mpi?

Can you successfully run a port loopback test within mpi?

— output of ditty----
[root@localhost ~]# ditty.dgap -a ttya01
onstr \033[5i offstr \033[4i term ansi
maxcps 100 maxchar 50 bufsize 100
-forcedcd altpin -fastbaud (9600)
-rtspace -dtrpace -ctspace -dsrpace -dcdpace
speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^; erase = ^?; kill = ^U; eof = ^D; eol = ;
eol2 = ; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 5;
-parenb -parodd cs8 hupcl -cstopb cread clocal crtscts
ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke
[root@localhost ~]#
----- minicom error ---------------
[root@localhost ~]# minicom R1
Device /dev/ttya01 lock failed: Operation not permitted.
[root@localhost ~]#

mpi ver 2.4.38
mpi loopback test OK…
dgap-1.1-1.i386.rpm (EPCA ) driver.

Thank you for your help.

The error appears to be related to Minicom and not the Digi ports.

Perhaps, this thread found on Red Hat’s site will be helpful: