Fax transmission errors when using VSI Fax

USB Devices
1

I am receiving Fax transmission errors when using VSI Fax with the Digi AccelePort RAS product. However, faxing works fine when using the standard com ports.

2

Make sure you are running the latest driver and firmware available for the Digi AccelePort RAS product.

Look for the file c2modems.ini in the following directory:
C:Program FilesVSIFaxServerlib

 Within this file is a section as follows:
 [Digi International modems]; --------------------------------------
 mfg-pattern = "Digi International"

 add the following command string: disable-class-2.0=true

  It should now look like:
  [Digi International modems]; -------------------------------------
  mfg-pattern = "Digi International"
  disable-class-2.0=true
3

We were receiving a blank page when a fax was sent by vsi-fax. (No problem with receiving faxes) We added this line and outbound started working, but inbound stopped working. Any ideas?.. Thanks, Ron

4

I don’t have experience using VSI Fax. However, it seems that disabling 2.0 support is probably the reason inbound faxes are not working, if the inbound fax requires 2.0 support.
Which OS and version are you using?
Which Digi driver version in installed?
Which Digi modem firmware is installed?
(The response to an AT i3 issued to the modem will give you the firmware version.)