I have two physical servers with AnyWhereUSB driver installed.

USB
1

I have two physical servers with AnyWhereUSB driver installed.

These two servers need to alternatively access a file on an USB stick connected to port 14 of my DigiUSBAnyWhere (firmware 1.38.1010 - hardware rev A-G2).

So, I’m looking for information to script the automation of the connection and release to this port 14’s device.

Do the scripts have to be run on the client (the two servers) or rather have to be run on the USBAnywhere itself or both ?

Any help or link to document appreciated.

2

In general only one computer can connect to one USB port and/or multiple USB ports but, multiple computers cannot share a single USB port in AnywhereUSB.