I try to configure the serial port off a Digi Connect Wi-SP


I need configure that the serial port receive a trailer (2 bytes) 0xCE,0X31 send the data.

I used the web interface to configure.

Configuration => Serial Ports => Port1 => Advance Serial Settings => Send data only under any of the following conditions => match string (but i can put here the bytes because it isn’t a common char).


see endpattern. details on pg. 400 of the command guide:

Thanks kjensen8

But i have a problem, i configure the string: “\xCE\x31”

but the device send more than a packet

(wireshark capture: 2 packets)