Here is a strange issue for you… When I use my 2 port TS everything works fine, however when I try out my new 4 port TS (using the same cables as the 2 port and the same port configuration (console management)) the keys do not enter in right. Such as; I will hit one key, but another one gets entered and to top it off, it always changes. For example, I will hit the button “g”, sometimes an “a” will get entered, sometimes a “^” will, it always changes. Any ideas? Thanks.
Sounds like a misconfigured baud rate or parity on the serial port. Please check the baud/parity of whatever you have plugged into the serial port, and compare it to the way the Portserver TS’s serial port is configured (under Basic Serial Settings).