Mib (snmp) files for AnywhereUSB/2 - latest firmware

Dear,

we have a AnywhereUSB/2 device
with firmware 2.02.23.23 (build 82002116_T awusb2 eos 4/19/2020 10:46:41p)

SNMP is enabled (System > Simple network management protocol settings).

But where could we found the MIB file?

There is a help here but that doesn’t work for our model, complete other interface.
https://www.digi.com/resources/documentation/digidocs/90002383/default.htm#os/services-snmp-download-mibs-t.htm?Highlight=mib

Please send us mib file or something simular to it from another type.
We would like to monitor this DIGI device with Zabbix monitoring.

Thanks in advance.

Dear,

did you get the mib for the anywhereusb/2 somewhere?

Hello,

The link you provided is for the newer AWUSB Plus devices. Your AWUSB is an older G2 (2nd generation) model.

For the AWUSB G2 products, we do not have any private AnywhereUSB-specific MIBS, but we do have some Digi-specific MIBs that may work with the AnywhereUSB, DIGI-DEVICE-INFO.mib and DIGI-SMI.mib (note: I believe that Digi-Device-Info.mib depends on Digi-SMI.mib). So, SNMP support for AnywhereUSB devices is limited.

The only SNMP traps that are available are discussed in the AnywhereUSB user guide:

https://www.digi.com/resources/documentation/DigiDocs/90001085/default.htm#tasks/t_configure_snmp.htm

Generate authentication failure traps
Generate login traps
Generate cold start traps (We will send a trap each time the device is booted/started.)
Generate link up traps (We will send a trap each time the network connection comes up.)